Being a homeowner has its own set of responsibilities as you have to keep a watchful eye at every nook and corner of your home to see if anything needs to be fixed, installed or replaced.
And unless you have owned a house for a number of years, you wouldn’t even know about replacement windows. This is mainly because windows do not enter our mode of thinking until it is too late. The window can suffer from damage due to trickling of rainwater or blowing drafts and this can taint the entire appearance of your home. It is better to attend to these damages before the condition of your window deteriorates any further.
In this article, we have taken the liberty to get you acquainted with few window basics you should know before you get your windows replaced.
- If your window is damaged beyond repair, it is time to install a new one
If the area around the window is rotted beyond repair making the structure questionable, then it is high time that you install a new one in its place. Additionally, you can opt to construct a frame around the window to hold it in place.
- Purchase single hung windows instead of double hung and save a few bucks
Both single and double hung windows have a lower sash or pane that slides skyward. You open the window and slide the sash up whenever your home gets unbearably hot. This makes the air waft through the screen.
With single hung windows, the upper sash is immobile and inoperable. Only the lower sash can slide both upwards and downwards. In case of double hung windows, both sashes can be moved. You can end up saving money with single hung windows as it has less moving parts and thus less chance of failure.
- Window replacement is no DIY project
Opting for window replacement will make you realise why sometimes it is good to have professionals handle a home improvement project.
Proficient window installers have the expertise of installing windows day in and day out, and they are equipped with the necessary tools and skills required to knock it out in a matter of minutes instead of taking hours or days.
Theoretically, homeowners can save money by replacing their own windows but by the time you have aced your learning curve, professionals will have finished with the entire project.
Window Terms All Homeowners Should Know
Irrespective of whether you are getting your windows fitted, repaired or replaced, it always helps to understand some of the terms being used. This would ensure that you get a solution that meets with your expectations and requirements. So keeping that in perspective, here are some window terms all homeowners should know.
- Frame – The frame is the outer part of the window that holds the glass in place and is usually made from timber, aluminium or PVC Windows Sheffield. It is made up of the head post at the top, the sill at the bottom, the sub-sills, the side jambs, the flat casing or the brick mould which surrounds the jambs and the sill and the blind stop which is the acting stopper of the sash.
- Beading – In order to reduce loss of heat through the frames, glazing beads are fitted to the window sill. Windows can be beaded both internally as well as externally. Internal beading intensifies security. In case of intruders, all their efforts to break into your house will be futile.
- Inert gas – Double and triple glazed windows are usually filled with gases such as argon, xenon, or krypton as these are known to have low thermal conductivity. Moreover, these gases stop heat from escaping from the premise.
- Tilt and turn–While sash windows open by moving straight up, tilt and turn windows can either tilt inwards making the sash come away from the frame, or turn inwards using the side hinges.
- Hinge –The mechanism responsible to connect the sash to the frame is the hinge. It enables the window to open and close.
- Seal – The seal is elemental in making your windows as energy-efficient as possible as it seals any gaps to stop the hot air from escaping. You will know your seal is broken if your double or triple glazed window starts to fog up on the inside.
- Glazing bars – Glazing bars are typically applied to period-style windows to make it look like multiple frames of glass. They can either be built to fit in with the window design, or can be stuck on.
- Mullion – Mullion is an upright bar that divides a window down the middle – for instance, with the sash or casement windows. Many contemporary homes characterises windows without mullions, as this affords them uninterrupted view of the outdoor area.
Now that you are familiar with the terms, make a smart choice that will help you get a window that caters to your requirements well.